UV LASER

UV Lasers

UV lasers operate at 355 nm and are known as cold marking laser technology.  The UV laser wavelength spectrum is highly absorbent by nearly all substrates.  A minimal amount heat is transferred away from the marking area, making this marking solution perfect for sensitive plastics and metals requiring low heat stress.  For example, sensitive electronics and circuit boards might require a UV mark to prevent damaging to surrounding circuits.

The Automark UV lasers operate by passing light through a crystal that filters out the 355 nm wavelength.  The other wavelengths are then discarded into a third harmonic crystal (THC).  During this process the THC increases in heat.  Cooing the crystal is done by passing water next to it using a pump.  The entire laser system to the right contains the laser, computer, and pump.  Automark UV lasers are built for 25,000 hours of operation and are offered in static and flying variants.

 

The Automark UV lasers are offered in 3W, 5W, 10W, and 15W power options.  All Automark UV lasers carry a two year warranty from time of delivery.

Automark U Series Upright UV Laser

Automark O Series Open UV Laser

Configurations

The Automark UV Lasers are offered in two configurations.  The U series (Upright) and the O series (Open).  The U series contains a window and reduces the Class IV laser to class I laser specifications.  The U and O series have 300 mm work areas.  All laser specifications are the same across the lineup.  For larger parts, the O series is popular as it allows the full length of the part to be presented under the laser. 

Substrates

Plastics, Ceramic, Glass, Metal and More

The Automark UV laser is suitable for metal materials and many nonmetals.  It is widely used in electronic components, integrated circuits, hardware, automobile parts, plastic products, and is especially useful for high quality laser precision micro-processing.  UV lasers can mark glass, diamonds, sapphire, LCD panels, IC grains, polymer films, ceramics, polypropylene, PA, and other thermoplastics.  To see if we can mark your part, feel free to reach out to us as we offer free part marking.

Consolidated Footprint

Our Automark AMUV-E line of UV lasers are tightly integrated, containing the entire laser source, control hardware, computer system, and chiller in one nicely integrated package.  The entire system is covered under the same warranty.  This integration allows for plug and play operation right out of the box.

Safety

Lasers are regulated by the FDA due to the radiation they emit and they are classified based on the damage they can do to skin and eyes.  A class I laser is a laser that is totally enclosed with no way for the beam to escape.  This is similar to a laser printer and cannot cause eye or skin damage with normal use.

A class IV laser is the highest classification of laser meaning they can cause skin and eye damage, and class IV specifically can cause damage if viewed indirectly. A laser, when properly used is extremely safe.

Operator safety is paramount, so we offer an entire line of lasers that take a Class IV laser, and turn it into a class I laser by enclosing it in a sealed box.  This is the E line of UV lasers.
If your company is seeking a laser and would like to further discuss the safety aspects an Automark rep can answer questions and guide you.  Feel free to contact your Automark rep today.

High Precision No Heat

With a beam diameter nearly 70% smaller than a comparable fiber marking system, the Automark UV laser systems offer high precision marking with no thermal effect to the surrounding area.  Combined with low power consumption, customers can mark on a wider range of substrates without damage while maintaining very low operating costs.

Round Part Marking

A standard laser has a focal point with a tolerance based on the distance from the lens.  This varies and depends on the lens size selected.  This focal height is only a few millimeters.  A round part is challenging for two reasons.  The first reason is the distance is changing as the slope of the Z-axis declines around the part.  The second reason is because the certerpoint of the galvanometer is creating a “longer” traverse to create the same image.  This means that if a person was to use a standard, 2D, laser to mark a round part, they may get elongated markings as the beam trails off over the edges.

To counter this we can use two separate systems independently or together, a rotary and 3-D laser.

We can use a rotary to hook the part onto and spin the part.  The rotary feeds information into the laser, so the laser knows where it needs to mark.  This is done if greater than 120 degree printing is required.   Smaller rotaries, like 50mm are perfect for rings and small items, whereas, the larger 100mm rotaries are perfect for mugs and firearms. 3D Laser System

A second way is to use a 3D laser system.  This is a laser specifically built that dynamically changes the focal point inside the system.  This provides the ability to print from 60 degrees to 100 degrees on the part.

Moving Parts

We offer flying laser solutions for moving parts like bottling operations, assembly lines, and conveyor belt part marking.  Special photography can be implemented to identify part orientation so fixtureless printing is capable.  For details on this and other more customized solutions, contact your Automark representative to discuss your program in detail.